Version 1 (modified by eskil, 7 years ago)

--

0.9.8.2.4

  • Features:
    • Improved contingency planning.
    • Minor UI fixes.
  • Bugfixes:
    • Recompute plan when deleting a deco gas (ticket:55).

0.9.8.2.3

  • Features:
    • Support rearranging levels.
  • Bugfixes:
    • Fixed bailout planning for inverted profiles (ticket:51).
    • Fixed emailing of plans with multiple levels (ticket:52).

0.9.8.2.2

  • iOS5 fixes

0.9.8.2

  • Bugfixes:
    • Crashes when displaying CCR dive plan using heliox as diluent (ticket:47).

0.9.8.1

  • Bugfixes:
    • Where changing the OC deco RMV wasn't handled correctly (ticket:46).

0.9.8

  • Features:
    • Easier table generation for deeper, longer and deeper & longer plans using the same tap and pick system as for bailout and lost glas. Tap a level in the profile and pick deeper, longer or deeper & longer and see the modified plan.
  • Bugfixes:
    • Runtimes in landscape orientation showed arrival-time, not departure-time (ticket:36).
    • Crashes when changing to metric/imperial on dive parameters (ticket:40).
    • Plans with O2 percentages with .5s were not stored properly in bookmarks (ticket:41).
    • When first installed, default to local unit system (ticket:43).
    • Reused last saved dive parameters for new dives (ticket:44).

0.9.7.2

  • Features:
    • SI interval pickable in more finegrained increments.
  • Bugfixes:
    • Exporting bad dive plans no longer crashes app (ticket:33).
    • Fixed saving current plan when backgrounding app on iOS 4.0 (ticket:34).
    • Fix for excessive deco computed for repetitive shallow no-deco dives.

0.9.7.1

  • Features:
    • Allow O2 in .5% increments when under 10%
    • Allows higher settings for ascent rates (use with caution)
  • Bugfixes:
    • Fix level next = end bug (see ticket:32)
    • UI fix: display right CCR gas at stops
    • UI fix: set the graphs tics right in the tissue pressure graphs
    • UI fix: minor cleanups to profile table cells

0.9.7

  • Features:
    • Changed ZHL16B to use same water/other-gas pressure as VPM-B, causes plans to be slightly less conservative
    • Raised max depth permitted to 400msw/1330fsw.
    • Cleaned up showing Offgassing per user suggestions (ticket:26). Now shows offgas depth but highlights the first stop depth after offgas depth.
    • Cleaned up HTML email plans
    • Copy to pasteboard feature, lets you export the plan to the iPhone pasteboard and paste into emails/notes/anything.
    • Option to invert plans per user suggestions
    • Speed/stability improvements
    • Minor UI changes/tweaks
    • Discarding plans keeps altitude changes if there were dives, if not, discards altitude changes to, per user suggestions
    • iOS 4.0 hires graphics
    • Still works fine for iPhone 3G and 3.x users and speed/memory improvements for these make it faster on 3G and 3GS phones.
  • Bugfixes:
    • Fix bug in altitude adjustments, ppO2 values in profile were shown as for sealevel and ZHL16/GF would compute wrong plans (too long, ala sealevel gauges)
    • Fix bug in level editor where editing a level would show the wrong RT/DT
    • Fixes occasionally missing ICD warnings in profile (see ticket:24)
    • Fixes for lostgas/bailout UI
    • Stability fixes
    • Memory leaks fixes, much faster on iOS 3.x and older 3G/3GS phones

0.9.6

  • Features:
    • Allow 0 minute levels to force gas switches (see ticket:19 and ticket:20)
    • Allow depths in increments of 5fsw/1msw.
  • Bugfixes:
    • Fix to VPM-B to permit legal plan. See ticket:18.
    • Fixes to both ZHL16B and VPM-B to not use deco gases between levels unless manually set. See ticket:19 and ticket:20.
    • Fix to VPM-B to calc offgas depth including early deco gas switch (e.g. if switching to deco gas at level for in-flight deco).

0.9.5

  • Features:
    • Tissue pressure graph.
    • Speedups.
    • Compute Time To Fly/Clear? with configurable pressure/altitude for Time To Fly.
    • END can be set to include O2/He.
    • Plan multiple lost gases. Display lost gases in lost gas screen.
    • Infinite combos of bailout/lost gases in lost gas screen.
    • Do rolling deco by disabling ascent rate between stops.
    • Align minutes by insert a <1 minute stop early.
    • Warn when ambient pressure exceeds diluent ppO2
  • Bugfixes:
    • Oddball dives that would show errors (vpm/b) now computed.
    • Toolbar offset on main screen.
    • Light attenuation in profile graph was off for imperial.
    • Rearrange labels on main screen.
    • Leak fixes that would slow down the app over time.
    • Bug where a set switch depth for a deco gas wouldn't always be used (vpm/b).
    • Bug in horizontal table view where depth would be shown in level time occasionally.
    • Bug in bailout/lost gas display where horizontal table would show the original plan.
    • Bug in gas consumption calc, that would lead to almost 2x gas consumption being shown.

0.9.4

  • Features:
    • Profile and inert gas partial pressure graphs. When in the profile view, turn the phone right to see the graphs. For gimmick value I used the old desktop version's code to simulate the atmospheric light attenuation in the profile graph, so depending on the water type you select (in the new settings screen), it'll give a semi decent impression of how dark it'll be.
    • Slim profile view, turn the phone right in a graph to get a slim and condensed plan view.
    • Configurable gas switch times (not pr. dive). Add up to 5 min for OC, CCR Setpoint or diluent switches.
    • Ability to reorder dives with SIs kept in the existing order. Lets you quickly replan the order if doing multiple dives.
  • Bugfixes:
    • particularly some problems in the zhl16 implementation that would make it refuse to calc some perfectly valid plans.
    • Also one bug in the vpm-b code that. This was only noticable on deep dives (600fsw/200msw) with big steps between deco stops (ie. 30fsw/10msw).
    • Other small UI issues.

0.9.3

  • Speedup/backgrounding calc.
  • Zhl16 uses default of 1 min stop time.

0.9.2

  • Features:
    • Email dive plan.
    • CCR bailout profiles, cave/wreck and OW from any level/stop.
    • Lost Gas profiles.
    • CNS/OTUs decay for repetitive dives.
    • Better handling of changing a plan between metric and imperial.
  • Bugfixes:
    • Fixes to ZHL16B when mixing CCR and OC.
    • Fixes to CCR O2 consumption calculation.
    • Fixes and improvements to UI.
    • Minor speed improvements to both VPM-B and ZHL16B algorithms.
    • Fixes to handling errors.

0.9.1

  • Fixed some spellings (deco gas vs decogas).
  • Made the colour highlights in the pickers more readable.
  • Switched back to showing runtime at end-of-segment rather than start.
  • Show the initial descent.

0.9

Initial public release.== 0.9.8.2.4 ==

  • Features:
    • Improved contingency planning.
    • Minor UI fixes.
  • Bugfixes:
    • Recompute plan when deleting a deco gas (ticket:55).

0.9.8.2.3

  • Features:
    • Support rearranging levels.
  • Bugfixes:
    • Fixed bailout planning for inverted profiles (ticket:51).
    • Fixed emailing of plans with multiple levels (ticket:52).

0.9.8.2.2

  • iOS5 fixes

0.9.8.2

  • Bugfixes:
    • Crashes when displaying CCR dive plan using heliox as diluent (ticket:47).

0.9.8.1

  • Bugfixes:
    • Where changing the OC deco RMV wasn't handled correctly (ticket:46).

0.9.8

  • Features:
    • Easier table generation for deeper, longer and deeper & longer plans using the same tap and pick system as for bailout and lost glas. Tap a level in the profile and pick deeper, longer or deeper & longer and see the modified plan.
  • Bugfixes:
    • Runtimes in landscape orientation showed arrival-time, not departure-time (ticket:36).
    • Crashes when changing to metric/imperial on dive parameters (ticket:40).
    • Plans with O2 percentages with .5s were not stored properly in bookmarks (ticket:41).
    • When first installed, default to local unit system (ticket:43).
    • Reused last saved dive parameters for new dives (ticket:44).

0.9.7.2

  • Features:
    • SI interval pickable in more finegrained increments.
  • Bugfixes:
    • Exporting bad dive plans no longer crashes app (ticket:33).
    • Fixed saving current plan when backgrounding app on iOS 4.0 (ticket:34).
    • Fix for excessive deco computed for repetitive shallow no-deco dives.

0.9.7.1

  • Features:
    • Allow O2 in .5% increments when under 10%
    • Allows higher settings for ascent rates (use with caution)
  • Bugfixes:
    • Fix level next = end bug (see ticket:32)
    • UI fix: display right CCR gas at stops
    • UI fix: set the graphs tics right in the tissue pressure graphs
    • UI fix: minor cleanups to profile table cells

0.9.7

  • Features:
    • Changed ZHL16B to use same water/other-gas pressure as VPM-B, causes plans to be slightly less conservative
    • Raised max depth permitted to 400msw/1330fsw.
    • Cleaned up showing Offgassing per user suggestions (ticket:26). Now shows offgas depth but highlights the first stop depth after offgas depth.
    • Cleaned up HTML email plans
    • Copy to pasteboard feature, lets you export the plan to the iPhone pasteboard and paste into emails/notes/anything.
    • Option to invert plans per user suggestions
    • Speed/stability improvements
    • Minor UI changes/tweaks
    • Discarding plans keeps altitude changes if there were dives, if not, discards altitude changes to, per user suggestions
    • iOS 4.0 hires graphics
    • Still works fine for iPhone 3G and 3.x users and speed/memory improvements for these make it faster on 3G and 3GS phones.
  • Bugfixes:
    • Fix bug in altitude adjustments, ppO2 values in profile were shown as for sealevel and ZHL16/GF would compute wrong plans (too long, ala sealevel gauges)
    • Fix bug in level editor where editing a level would show the wrong RT/DT
    • Fixes occasionally missing ICD warnings in profile (see ticket:24)
    • Fixes for lostgas/bailout UI
    • Stability fixes
    • Memory leaks fixes, much faster on iOS 3.x and older 3G/3GS phones

0.9.6

  • Features:
    • Allow 0 minute levels to force gas switches (see ticket:19 and ticket:20)
    • Allow depths in increments of 5fsw/1msw.
  • Bugfixes:
    • Fix to VPM-B to permit legal plan. See ticket:18.
    • Fixes to both ZHL16B and VPM-B to not use deco gases between levels unless manually set. See ticket:19 and ticket:20.
    • Fix to VPM-B to calc offgas depth including early deco gas switch (e.g. if switching to deco gas at level for in-flight deco).

0.9.5

  • Features:
    • Tissue pressure graph.
    • Speedups.
    • Compute Time To Fly/Clear? with configurable pressure/altitude for Time To Fly.
    • END can be set to include O2/He.
    • Plan multiple lost gases. Display lost gases in lost gas screen.
    • Infinite combos of bailout/lost gases in lost gas screen.
    • Do rolling deco by disabling ascent rate between stops.
    • Align minutes by insert a <1 minute stop early.
    • Warn when ambient pressure exceeds diluent ppO2
  • Bugfixes:
    • Oddball dives that would show errors (vpm/b) now computed.
    • Toolbar offset on main screen.
    • Light attenuation in profile graph was off for imperial.
    • Rearrange labels on main screen.
    • Leak fixes that would slow down the app over time.
    • Bug where a set switch depth for a deco gas wouldn't always be used (vpm/b).
    • Bug in horizontal table view where depth would be shown in level time occasionally.
    • Bug in bailout/lost gas display where horizontal table would show the original plan.
    • Bug in gas consumption calc, that would lead to almost 2x gas consumption being shown.

0.9.4

  • Features:
    • Profile and inert gas partial pressure graphs. When in the profile view, turn the phone right to see the graphs. For gimmick value I used the old desktop version's code to simulate the atmospheric light attenuation in the profile graph, so depending on the water type you select (in the new settings screen), it'll give a semi decent impression of how dark it'll be.
    • Slim profile view, turn the phone right in a graph to get a slim and condensed plan view.
    • Configurable gas switch times (not pr. dive). Add up to 5 min for OC, CCR Setpoint or diluent switches.
    • Ability to reorder dives with SIs kept in the existing order. Lets you quickly replan the order if doing multiple dives.
  • Bugfixes:
    • particularly some problems in the zhl16 implementation that would make it refuse to calc some perfectly valid plans.
    • Also one bug in the vpm-b code that. This was only noticable on deep dives (600fsw/200msw) with big steps between deco stops (ie. 30fsw/10msw).
    • Other small UI issues.

0.9.3

  • Speedup/backgrounding calc.
  • Zhl16 uses default of 1 min stop time.

0.9.2

  • Features:
    • Email dive plan.
    • CCR bailout profiles, cave/wreck and OW from any level/stop.
    • Lost Gas profiles.
    • CNS/OTUs decay for repetitive dives.
    • Better handling of changing a plan between metric and imperial.
  • Bugfixes:
    • Fixes to ZHL16B when mixing CCR and OC.
    • Fixes to CCR O2 consumption calculation.
    • Fixes and improvements to UI.
    • Minor speed improvements to both VPM-B and ZHL16B algorithms.
    • Fixes to handling errors.

0.9.1

  • Fixed some spellings (deco gas vs decogas).
  • Made the colour highlights in the pickers more readable.
  • Switched back to showing runtime at end-of-segment rather than start.
  • Show the initial descent.

0.9

Initial public release.== 0.9.8.2.4 ==

  • Features:
    • Improved contingency planning.
    • Minor UI fixes.
  • Bugfixes:
    • Recompute plan when deleting a deco gas (ticket:55).

0.9.8.2.3

  • Features:
    • Support rearranging levels.
  • Bugfixes:
    • Fixed bailout planning for inverted profiles (ticket:51).
    • Fixed emailing of plans with multiple levels (ticket:52).

0.9.8.2.2

  • iOS5 fixes

0.9.8.2

  • Bugfixes:
    • Crashes when displaying CCR dive plan using heliox as diluent (ticket:47).

0.9.8.1

  • Bugfixes:
    • Where changing the OC deco RMV wasn't handled correctly (ticket:46).

0.9.8

  • Features:
    • Easier table generation for deeper, longer and deeper & longer plans using the same tap and pick system as for bailout and lost glas. Tap a level in the profile and pick deeper, longer or deeper & longer and see the modified plan.
  • Bugfixes:
    • Runtimes in landscape orientation showed arrival-time, not departure-time (ticket:36).
    • Crashes when changing to metric/imperial on dive parameters (ticket:40).
    • Plans with O2 percentages with .5s were not stored properly in bookmarks (ticket:41).
    • When first installed, default to local unit system (ticket:43).
    • Reused last saved dive parameters for new dives (ticket:44).

0.9.7.2

  • Features:
    • SI interval pickable in more finegrained increments.
  • Bugfixes:
    • Exporting bad dive plans no longer crashes app (ticket:33).
    • Fixed saving current plan when backgrounding app on iOS 4.0 (ticket:34).
    • Fix for excessive deco computed for repetitive shallow no-deco dives.

0.9.7.1

  • Features:
    • Allow O2 in .5% increments when under 10%
    • Allows higher settings for ascent rates (use with caution)
  • Bugfixes:
    • Fix level next = end bug (see ticket:32)
    • UI fix: display right CCR gas at stops
    • UI fix: set the graphs tics right in the tissue pressure graphs
    • UI fix: minor cleanups to profile table cells

0.9.7

  • Features:
    • Changed ZHL16B to use same water/other-gas pressure as VPM-B, causes plans to be slightly less conservative
    • Raised max depth permitted to 400msw/1330fsw.
    • Cleaned up showing Offgassing per user suggestions (ticket:26). Now shows offgas depth but highlights the first stop depth after offgas depth.
    • Cleaned up HTML email plans
    • Copy to pasteboard feature, lets you export the plan to the iPhone pasteboard and paste into emails/notes/anything.
    • Option to invert plans per user suggestions
    • Speed/stability improvements
    • Minor UI changes/tweaks
    • Discarding plans keeps altitude changes if there were dives, if not, discards altitude changes to, per user suggestions
    • iOS 4.0 hires graphics
    • Still works fine for iPhone 3G and 3.x users and speed/memory improvements for these make it faster on 3G and 3GS phones.
  • Bugfixes:
    • Fix bug in altitude adjustments, ppO2 values in profile were shown as for sealevel and ZHL16/GF would compute wrong plans (too long, ala sealevel gauges)
    • Fix bug in level editor where editing a level would show the wrong RT/DT
    • Fixes occasionally missing ICD warnings in profile (see ticket:24)
    • Fixes for lostgas/bailout UI
    • Stability fixes
    • Memory leaks fixes, much faster on iOS 3.x and older 3G/3GS phones

0.9.6

  • Features:
    • Allow 0 minute levels to force gas switches (see ticket:19 and ticket:20)
    • Allow depths in increments of 5fsw/1msw.
  • Bugfixes:
    • Fix to VPM-B to permit legal plan. See ticket:18.
    • Fixes to both ZHL16B and VPM-B to not use deco gases between levels unless manually set. See ticket:19 and ticket:20.
    • Fix to VPM-B to calc offgas depth including early deco gas switch (e.g. if switching to deco gas at level for in-flight deco).

0.9.5

  • Features:
    • Tissue pressure graph.
    • Speedups.
    • Compute Time To Fly/Clear? with configurable pressure/altitude for Time To Fly.
    • END can be set to include O2/He.
    • Plan multiple lost gases. Display lost gases in lost gas screen.
    • Infinite combos of bailout/lost gases in lost gas screen.
    • Do rolling deco by disabling ascent rate between stops.
    • Align minutes by insert a <1 minute stop early.
    • Warn when ambient pressure exceeds diluent ppO2
  • Bugfixes:
    • Oddball dives that would show errors (vpm/b) now computed.
    • Toolbar offset on main screen.
    • Light attenuation in profile graph was off for imperial.
    • Rearrange labels on main screen.
    • Leak fixes that would slow down the app over time.
    • Bug where a set switch depth for a deco gas wouldn't always be used (vpm/b).
    • Bug in horizontal table view where depth would be shown in level time occasionally.
    • Bug in bailout/lost gas display where horizontal table would show the original plan.
    • Bug in gas consumption calc, that would lead to almost 2x gas consumption being shown.

0.9.4

  • Features:
    • Profile and inert gas partial pressure graphs. When in the profile view, turn the phone right to see the graphs. For gimmick value I used the old desktop version's code to simulate the atmospheric light attenuation in the profile graph, so depending on the water type you select (in the new settings screen), it'll give a semi decent impression of how dark it'll be.
    • Slim profile view, turn the phone right in a graph to get a slim and condensed plan view.
    • Configurable gas switch times (not pr. dive). Add up to 5 min for OC, CCR Setpoint or diluent switches.
    • Ability to reorder dives with SIs kept in the existing order. Lets you quickly replan the order if doing multiple dives.
  • Bugfixes:
    • particularly some problems in the zhl16 implementation that would make it refuse to calc some perfectly valid plans.
    • Also one bug in the vpm-b code that. This was only noticable on deep dives (600fsw/200msw) with big steps between deco stops (ie. 30fsw/10msw).
    • Other small UI issues.

0.9.3

  • Speedup/backgrounding calc.
  • Zhl16 uses default of 1 min stop time.

0.9.2

  • Features:
    • Email dive plan.
    • CCR bailout profiles, cave/wreck and OW from any level/stop.
    • Lost Gas profiles.
    • CNS/OTUs decay for repetitive dives.
    • Better handling of changing a plan between metric and imperial.
  • Bugfixes:
    • Fixes to ZHL16B when mixing CCR and OC.
    • Fixes to CCR O2 consumption calculation.
    • Fixes and improvements to UI.
    • Minor speed improvements to both VPM-B and ZHL16B algorithms.
    • Fixes to handling errors.

0.9.1

  • Fixed some spellings (deco gas vs decogas).
  • Made the colour highlights in the pickers more readable.
  • Switched back to showing runtime at end-of-segment rather than start.
  • Show the initial descent.

0.9

Initial public release.