RunTimes in vertical display are off for levels.

[eskil]

Reported by jwood ;

"I noticed what may be a possible bug...when switching to the horizontal screen showing the dive plan (not the graphs), the "level" line shows an incorrect Run Time of the same duration as the descent time, rather than the actual run time required until the ascent starts.
My plan is 18/30 for 20 mins at 65m, using 50% and O2 for deco."

The vertical display correctly shows the level RT is 20. But when turned horizontally, the RT for the level is 2:08, which is the initial descent time. In fact, all levels show the RT for the previous leg.

This does not affect the stop times or anything, it's solely an error in the code that displays the horizontal table.