Version 14 (modified by dwessels, 10 years ago)

--

QuickStart? Guide

Follow this quick guide for a walkthough on how to create a quick profile in Baltic.


Home Screen

This is the Baltic Dive Home Screen
1. To plan a dive tap on "Add Dive"

*Please see additional settings for details on how to change altitude and deco algorithm settings.


Dive Editor Screen

This is the Dive Editor Screen. Currently there are no levels.
1. To plan a dive tap on "Add Level"

*Please see "Ascent and RMV Settings" for details on how to change "Ascent / RMV."


Level Editor Screen

This is the Level Editor Screen. The level number for this dive is listed at the top of the screen.
1. To plan a descent rotate the "Depth" wheel until you get the depth planned.
2. Now rotate the "Bottom Time" wheel to select bottom time.
**Note the color of the number. Green means within NDL, black means deco required.
3. Now rotate the "O2" wheel to select the Oxygen.
**The color indicates: Red= 0-0.2, Orange=0.2- 1.0, Green=1.2-1.4, Red=1.61+
4. Now rotate the "He" wheel to select the Helium.
**The color indicates END level: Red= 130'+ , Green=95-114'. The END is show at the bottom in the middle of the screen.
5. Now rotate the "CCR" wheel to select dive mode. Select "OC" for Open Circuit or select a setpoint (0.7-1.6) if diving CCR.
5. Once done, click on "Save."

*Note the information at the bottom of the screen. This is live dive information that is planned as soon as a wheel is changed!


Dive Editor Screen with Level

This is the Dive Editor Screen. Currently is one level defined. You can see the profile by scrolling to the bottom of the screen.
1. To add a deco gas tap "Add Decogas"

*Please see "Ascent and RMV Settings" for details on how to change "Ascent / RMV."


Add Deco Gas Screen

This is the Deco Gas Screen. If this is the first deco gas, 50% will be auto selected. If 50% exists, it will auto select O2.
1. To add a deco gas tap "Add Decogas"

*Please see "Ascent and RMV Settings" for details on how to change "Ascent / RMV."