Changes between Version 10 and Version 11 of HowToPlanCCRByMaxBailoutTime

Show
Ignore:
Timestamp:
11/14/09 02:05:20 (10 years ago)
Author:
eskil
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • HowToPlanCCRByMaxBailoutTime

    v10 v11  
    11== How To Plan a CCR Dive by keeping a Max Bailout Time ==  
     2 
    23Say you want to plan a CCR diveand you're going to 120fsw, using air at 1.2 ppo2, air as bailout and you aiming at a dive time between 90 and 120 minutes. You're diving on a wall that goes shallow, and you want limit your dive to have at max 30 minutes of bailout time. 
     4 
     5The way to do this is via the Deco Time displayed in the level editor screen, shown as "DT: x (was y)". The steps shown here are easily applied to OC. 
    36 
    47First, make a plan for 120fsw, air @ 1.2 for 5 minutes, and under "Deco Gases/Bailout", add air, starting at 120fsw and set it to OC. Setting it to OC effectively makes it a bailout plan, since it makes Baltic use the deco gas from the time you leave the last level. I've also set OC Switch Time (in main settings) to 1 minute, since by default Baltic will add 1 minute when bailing out[[FootNote(Bailout "penalty" time may be configurable later. OC Switch Time in this specific usage isn't used in 0.9.5. However when used (later than 0.9.5).)]].