Changes between Version 9 and Version 10 of HowToPlanCCRByMaxBailoutTime

Timestamp:

11/14/09 01:55:36 (15 years ago)

Author:

eskil

Comment:

--

HowToPlanCCRByMaxBailoutTime

@@ -2 +2 @@
 Say you want to plan a CCR diveand you're going to 120fsw, using air at 1.2 ppo2, air as bailout and you aiming at a dive time between 90 and 120 minutes. You're diving on a wall that goes shallow, and you want limit your dive to have at max 30 minutes of bailout time.
 
-First, make a plan for 120fsw, air @ 1.2 for 5 minutes, and under "Deco Gases/Bailout", add air, starting at 120fsw and set it to OC. Setting it to OC effectively makes it a bailout plan, since it makes Baltic use the deco gas from the time you leave the last level. I've also set OC Switch Time (in main settings) to 1 minute, since by default Baltic will add 1 minute when bailing out (*).
+First, make a plan for 120fsw, air @ 1.2 for 5 minutes, and under "Deco Gases/Bailout", add air, starting at 120fsw and set it to OC. Setting it to OC effectively makes it a bailout plan, since it makes Baltic use the deco gas from the time you leave the last level. I've also set OC Switch Time (in main settings) to 1 minute, since by default Baltic will add 1 minute when bailing out[[FootNote(Bailout "penalty" time may be configurable later. OC Switch Time in this specific usage isn't used in 0.9.5. However when used (later than 0.9.5).)]].
 
 [[Image(wiki:HowToPlanCCRByMaxBailoutTime:Step1.1Level.png, 150px, border=1)]] [[Image(wiki:HowToPlanCCRByMaxBailoutTime:Step1.2Gas.png, 150px, border=1)]] [[Image(wiki:HowToPlanCCRByMaxBailoutTime:Step1.3Plan.png, 150px, border=1)]] 
 
-Now to aim for 30 mins of max bailout deco time, go the leveleditor. Note the field that says "DT: 4". Increment the Bottom Time until it says "30", save the level and you now have a plan that has a 30 minute bailout from the bottom. The cuft of air consumption in this plan is the maximum amount of bailout you'll need. Even though we'll add levels, they'll be shallower and max bailout time will still be 30, hence have less consumption. In case, 36cuft is needed, so a 40cuft tank might suffice(**).
+Now to aim for 30 mins of max bailout deco time, go the leveleditor. Note the field that says "DT: 4". Increment the Bottom Time until it says "30", save the level and you now have a plan that has a 30 minute bailout from the bottom. The cuft of air consumption in this plan is the maximum amount of bailout you'll need. Even though we'll add levels, they'll be shallower and max bailout time will still be 30, hence have less consumption. In case, 36cuft is needed, so a 40cuft tank might suffice [[FootNote(Keep in mind the bailout consumption computed is using your ``Deco OC RMV`` setting, adjust as needed.)]].
 
 [[Image(wiki:HowToPlanCCRByMaxBailoutTime:Step2.1Edit.png, 150px, border=1)]] [[Image(wiki:HowToPlanCCRByMaxBailoutTime:Step2.2Plan.png, 150px, border=1)]] [[Image(wiki:HowToPlanCCRByMaxBailoutTime:Step2.3Profile.png, 150px, border=1)]] 
@@ -39 +39 @@
 You might want to tweak the plan to have more "even" times than numbers like 16 and 13 minutes. In that case, in each step just pick times/depths to the numbers are prettier, but may not hit exactly 30 minutes of Bailout Time.
 
-
-(*) Bailout "penalty" time may be configurable later. OC Switch Time in this specific usage isn't used in 0.9.5. However when used (later than 0.9.5).
-
-(**) Keep in mind the bailout consumption computed is using your ``Deco OC RMV`` setting, adjust as needed.
+[[FootNote]]